Back-contact technology, which forms electrodes only on the back face of solar cells, can make the light receiving area of the top face larger by gathering up all the electrodes on the back face and as a result enhance conversion efficiency. Heterojunction technology is technology which binds together plural kinds of semiconductors having different material properties such as combining crystalline silicon with amorphous silicon to reduce defects which lower conversion efficiency or combining materials which convert the light energy of different wavelength ranges into electricity to obtain a higher conversion efficiency. *2 Crystalline silicon solar cell (heterojunction back-contact type) A crystalline silicon solar cell is a cell which incorporates heterojunction technology and back-contact technology.
*The article was amended on October 12 to reflect that the company’s manufacturing facility in China has a capacity of 1.5 GW.*1 Levelized cost of electricity (LCOE) Levelized cost of electricity (LCOE) is an economic assessment of the average total cost to build and operate a power generation asset over its lifetime divided by the total energy output of the asset over that lifetime. “ The TOPCon modules have a very close efficiency to heterojunction (HTJ) and interdigitated back contact (IBC) solar cells with a positive factor of a better price and higher stability in the supply chain,” said the company. It said the TOPCon technology offers advantages over conventional monocrystalline PERC products, including lower degradation rates in the first year due to light-induced degradation (LID) or light-elevated temperature-induced degradation (LeTID). The manufacturer offers a 15-year product warranty and a 30-year power output guarantee for 87.4% of the initial yield. They all feature junction boxes with IP 68 ratings, 20 mm solar glass, and 30 mm anodized aluminum alloy frames. Their open-circuit voltage is between 37.45 V and 38.26 V and the short-circuit current is between 13.88 A and 14.17 A.Īll panels have an operating temperature between -40 C and 85 C and a temperature coefficient of -0.35% per degree Celsius. These panels measure 1,724 mm x 1,133 mm x 30 mm and weigh 26 kg.
ALL BACK CONTACT SOLARCELL SERIES
The smallest series features five modules with a power output ranging from 410 W to 430 W and an efficiency of 20.99% to 22.01%. The modules measure 1,910 mm x 1,133 mm x 30 mm and weigh 29 kg. The open-circuit voltage is between 42.05 V and 42.71 V and the short-circuit current is between 13.99 A and 14.33 A. The mid-size series consists of five products with wattage spanning from 460 W to 480 W and efficiency comprised between 21.26% and 22.18%. The modules have a see 2,278 mm x 1,133 mm x 35 mm and weigh in at 33 kg. The open-circuit voltage is between 50.07 V and 50.68 V and the short-circuit current is between 14.07 A and 14.31 A. The largest module series includes five panel versions with power outputs of 555 W to 575 W and power conversion efficiency ranging from 21.50% to 22.28%. The modules show relatively higher durability against wind and snow compared to typical single-glass modules.” This makes the module highly durable and perfect not only for moderate climates but also for extreme climates such as deserts or tropical areas. “The modules have a glass-glass bill of materials with polyolefin elastomer (POE) as encapsulation material. “The new module will be produced at our 1,500 MW factory in China were we recently upgraded our production lines,” a company spokesperson told pv magazine.
AE Solar has unveiled three different solar modules based on n-type tunnel oxide passivated contacts (TOPCon) cell technology.
0 kommentar(er)
